Vintage Audiobahn AB-100 EQ Graphic Equalizer Car Audio 2-4 Channel w/ Light Bar

Description

FREE Shipping Lower 48 States !! Used Vintage Original Working when Removed Many Years Ago Audiobahn AB100-EQ Graphic Equalizer Preamp with Fader for 2 or 4 channel audio systems complete with Disco Lights or Peak Light Bars top area both sides. This clean compact little unit with original rear wiring plug measures 4 1/2 inch wide & 1 1/2 inches tall. There are 2 factory holes on the top lid cover to mount under your dash & 2 factory holes on the bottom lid cover for a bracket to attach to your center console however you would like to mount it but "NO MOUNTING BRACKET IS INCLUDED HERE" you will need to fabricate one or go to the hardware store etc. I removed the top & bottom cover & didn't see any circuit board or wiring burn marks, damage, etc. I did the smell test as well & again nothing smelled burnt or looked melted etc. I do not have a wiring diagram but going from memory there was a replaceable glass style in line fuse attached to the yellow wire that went to the battery or 12 volts, & the other 4 wires attached to your speakers. On the right side rear of the case the middle hole there was a negative chassis ground attached, the screw is now missing so maybe go to the hardware store & purchase a fusible link as well as a new screw. The top RCA jacks are clearly marked Input & Output which speaker they go to etc. This Graphic Equalizer Unit is being sold "USED AS IS UNTESTED" however if you wire it up & it doesn't happen to play or work properly you simply pay the return shipping costs & will be given a full refund if it is returned in the exact same condition you received it in. If you or your electrician wire it up incorrectly & Burn it Up or return it smelling burnt "NO REFUND FOR YOU" so please do not even try to send it back in that condition. Brand New electrical components are usually the way to go with todays advanced technology but if you have a vintage car & like having vintage audio equipment this is for you. I suggest the buyer inspect the circuit boards, wiring, & do the smell test within the first 24 hours of this item being delivered & before you even begin to wire it up. It should take you less than 10 minutes to inspect this unit & I do not want the buyer claiming on the seventh day "Dude you sent me a burnt up Unit" Sorry but that won't Fly. I will give the buyer 7 days upon delivery for you to test this EQ & get back to me with any issues or problems relating to a return however it should work fine without any problems or issues.