Rotary Lift FC5797-TH-UNI 4 Post Lift Cylinder Rebuild Seal Kit FC5797 hydraulic

Description

Call our customer service hotline @ 866-902-6060 if you need help identifying which seal kit is best for you!
This is a cylinder rebuild kit for many Rotary brand 4 post lifts rated for 12000 lb capacity. Its fits cylinder
This Kit Rebuilds 1 Cylinder
FC5797
cylinders and some S1300002 cylinders
made
by
texas hydraulics for rotary lifts. This kit includes all seals as well as wear
bands
and felt buffer rings to
do a complete
rebuild on
your
cylinder. Please see below for help
identifying your
cylinder to ensure seal fitment!
-HOW TO IDENTIFY YOUR CYLINDER IS A TEXAS HYDRAULIC FC5797
If your 4 post lift has a FC5797-1 cylinder in it, or S1300002 cylinder.It should be stamped on the Body / Barrel of the cylinder near the clevis end of the cylinder . The stampings you are looking for will read "FC5797" or S130002 followed by the "TH", "TX" or "TXT". This specify's it being a texas hydraulics cylinder and this seal kit will fit your cylinder. This cylinder measures 74-5/16" long from the center of the clevis pin hole to the end of the chrome shaft  when fully retracted.  If you have your cylinder apart already, compare your piston seal with the one pictured to the left. Pacoma cylinders have distinctive RED double lipped seal on the piston. If you are still unsure if this seal kit will work for you, call our help hotline above and we will be glad to determine what seal kit you need.
This kit came in the following model lifts and may fit others as well
S
M122, AR122, SMO123,
ARO122, QL4P-100 QLHV-100,
SM101-100,
Found in the following if cylinder has been
replaced
SM101,
SM120, AR120, CWA120,
SM121, AR121, QL4P, QLHV
-HOW LONG DOES IT TAKE??
This kit usually takes less than an hour to install and can be done with a vice, pipe wrench and a few hand tools.
-WHAT THIS KIT WONT' FIT!
If you see the words "Pacoma" , "Made in Germany" or part # "FC5342" or "FC542" then this is not hte seal kit that fits your cylinder will
NOT work with your lift but we offers those seal kits as well in our ebay store.  ALSO there is a universal rotary 2 post seal kit that fits all rotary 4 post with the listed model numbers and has both style cylinder seals. Contact 866-902-6060 for universal kit.
-RETURN POLICY ON SEAL KITS
Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag. If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn't verify fitment first.